1. What is a Fish Food Machine
Fish food machine uses corn, soybeans, soybean meal, soybean cake, feed additives, and other feed extruders to produce extruded feed pellets that are exquisite, nutritious, and suitable for animals such as fish, ducks, and turtles.
2. Characteristics of Fish Food Machine
1. Simple structure, wide adaptability, small footprint, and low noise.
2. Powdered feed and grass meal can be pelletized without or a little liquid addition, so the moisture content of pellet feed is basically the moisture content of the material before pelleting, which is more conducive to storage.
3. Chicken, duck, fish, etc., can obtain higher economic benefits than mixed powdered feed.
4. Dry material processing, the produced feed pellets have high hardness, smooth surface and internal maturation, which can improve the digestion and absorption of nutrients.
5. The granule formation process can cause the denaturation of pancreatic enzyme resistance factors in grains and beans, reduce the adverse effects on digestion, kill all kinds of parasite eggs and other pathogenic microorganisms, and reduce all kinds of worms and digestive system diseases.
3. How to Make Fish Food Pellets
Main ingredients: rice noodles, soybean flour, bread flour (whole wheat is better), eggs, carrots, yeast powder, yogurt, spirulina
1. Mix the three types of flour, rice noodles, soy flour, and bread flour at a ratio of 1:1:0.5, and then beat two eggs, both egg white and egg yolk.
2. Carrots are peeled and mixed with a little water in a rice milling machine to make a juice. If no water is added, the carrots will not be juiced or pureed.
The yeast powder should be poured into the mixed flour together with the yogurt, and the stirred carrot juice should also be poured into the flour.
3. At this time, start kneading the dough.
If the dough is hard, add some water, try to make the dough softer, knead it evenly, cover it and place it in a place where the room temperature is high to start the dough (Northeast Wake-up Noodle). Wake it up for two hours.
4. After the hair is finished, continue to knead it into a ball. At this time, the dough is very sticky. It’s okay. Knead it well.
5. At this time, the master started to steam it in the pot. After 10 minutes of steaming, it will be almost fully cooked.
After taking out the pot, continue to stir it with chopsticks to dissipate heat and let it cool.
6. Spirulina is flaky, use a food processor to powder it, pour it on the steamed dough in the air, and knead it well.
7. Use your hand to pull a piece of kneaded dough into the noodle maker, press it into noodles, put it on a paper or board, and dry it in a ventilated place.
There is heating in the north, and put it on the heating or geothermal floor to dry. better.
8. The dried noodles will be broken into small pieces when you grab them with your hands.
The big and small fish are just right to eat. Then put it in a box and put it in a cool place.
4. What are the Different Machine used in Fish Food Processing
Composition of fish food production line:
1. Powder mixing machine:
choose different types of powder mixing machines according to the output of the production line
2. Feeding machine:
using the motor as the power screw conveying to ensure convenient and fast feeding.
3. Puffing machine:
Choose different types of puffing hosts according to the output of the production line. The output can range from 100kg/h to 600kg/h. Corn meal, cereal meal, bone meal, meat meal, etc. can be used as raw materials, and the specific product shape can be replaced. Mold.
4. Hoist:
Feed the feed to the oven. The height of the hoist is determined by the oven, and an air conveyor can also be used.
5. Multi-layer oven:
the oven is a mostly an electric oven, the temperature is adjusted by the control cabinet between 0-200 degrees, the inside is stainless steel double-layer mesh bag, the baking time can be adjusted according to the speed, five-layer, seven-layer stainless steel oven;
6. Vibrating screen: Sieve to remove excess scraps.
7. Seasoning line:
There are octagonal tube, cylinder, lifting single drum, double drum seasoning line, which is configured according to the output and the nature of the product
5. What Equipment is Needed for Fish Feed Production
Composition of aquatic fish feed production line:
1. Powder mixing machine:
Choose different types of powder mixing machine according to the output of the production line. There are three main models for you to choose bfj-ii.
2. Feeding machine:
using the motor as the power screw conveying, it is convenient and quick to feed.
3. Puffing machine:
Choose different types of puffing hosts according to the output of the production line. The output can range from 200kg/h to 260kg/h. Corn meal, cereal meal, bone meal, meat meal, etc. can be used as raw materials, and the specific product shape can be replaced. Mold.
4. Hoist:
Feed the feed to the oven. The height of the hoist is determined by the oven, and an air conveyor can also be used.
5. Multi-layer oven:
the oven is mostly electric oven, the temperature is adjusted by the control cabinet between 0-200 degrees, the inside is stainless steel double-layer mesh bag, the baking time can be adjusted according to the speed, five-layer, seven-layer stainless steel oven;
6. Vibrating screen: Sieve to remove excess scraps.
7. Seasoning line:
the oil sprayer sprays oils, attractants, etc., the seasoning tube includes octagonal tube, cylinder, lifting single drum, double drum seasoning line, according to the output and product nature configuration, spraying grease on the surface of the feed, at the same time Spray minced meat and spices evenly.
8. Cooling and conveying:
reduce the temperature of frying and feed, promote the solidification of fat, reduce the temperature of particles, and facilitate packaging.
6. After-sales Service of Fish Food Machine
1. Provide you with consultation on the market, equipment, technology, raw and auxiliary materials, packaging, etc.
2. Assist you in equipment selection, process design, plant optimization layout, and on-site service if necessary.
3. According to your product, you can design a compensation plan for changes in raw materials and carry out on-site demonstrations. Provide various basic formulas.
4. According to your needs, special design, manufacture and application tests can be carried out, and targeted training can be provided.
5. Design a reasonable packaging and transportation plan and transportation for you, and send technicians to install and debug and train personnel.
6. The equipment is guaranteed for one year, long-term preferential, and spare parts are supplied.
