fbpx

A good China corn chip machine manufacturer will be able to provide you with a variety of options in regards to the sourcing process. These include using group sourcing or individual sourcing methods.

You can also make use of a comprehensive database of Chinese suppliers to improve your sourcing performance.

In this article, we will go over several advantages of working with a manufacturer.

The following sections will explain what you can expect from each type of machine.

twin screw extruder (1)

Automatic Flour Tortilla Machine

The Automatic Corn Chip Machine Manufacturer provides a wide range of equipment for the production of tortilla chips. The company has a complete line of tortilla chip making machines, including 400, 600, and 800 pound batches.

The manufacturer also provides assistance with layout design, equipment selection, product development, and service.

These systems use advanced technologies that increase the efficiency of production processes and utilize the resources of the customer.

JC Ford offers a complete line of tortilla chip manufacturing equipment, including a sigma blade design that promotes gentle hydration.

To start the process, the masa is placed in a three-tiered gas-fired oven for about 35 seconds or less.

Then, it is placed in a frying chamber where the temperature is increased to 550 to 600 degrees Fahrenheit.

This step helps reduce the moisture absorption during frying, which gives tortilla chips a richer, more flavorful taste.

After frying, the corn chips are allowed to cool down through open tiers for up to 20 minutes.

The frying process helps to distribute moisture evenly and reduce the risk of burning or sticking.

twin screw extruder diagram

European technology

The SJP-MODEL CORN CHIPS production line adopts European technology and is easy to operate.

Its roller pressing process ensures the formation of nice shapes and reduces wastage.

It is the most advanced corn chip processing machinery in the world.

The machine is made by Saixin snack food machinery, which is a shareholder-owned company with over 10 years of experience in snack food equipment.

Read on to know more about the SJP-MODEL corn chip machine.

Investing in state-of-the-art chip production can benefit the European industry, including participating in AI systems.

The European Union is also looking to become more self-reliant on this critical technology.

Currently, Europe accounts for only 10% of the global chip manufacturing market, but the Commission is hoping to increase that proportion to at least 20% within the next five years.

The EU is exploring the possibility of investing as much as 20-30 billion euros in new chip manufacturing facilities in Europe.

High degree of automation

A Corn Chips Making Machine is composed of feeding system, extrusion system, rotary cutting system, heating system, transmission system and control system.

It features reasonable design and high automation. Its main parts are high and low pressure screws, a high-temperature drum extruder, and other components.

Corn chips made by this machine do not produce waste water or gas, and do not lose the raw materials.

Chinese manufacturers have become the world’s biggest consumer of automation products, overtaking Japan as the largest market for robots in 2013. However, the overall level of automation in China is very low.

The proportion of machine tools equipped with numerical controls (NCs) is the same as in Japan in the late 1970s, and the diffusion rate of enterprise software is far less than 60%.

As a result, Chinese manufacturers must improve their productivity to maintain their profits.

Automatic control of extrusion parameters

To control the production process of corn chips, automatic control of extrusion parameters is required.

The feed material should be heated to a temperature ranging from 15deg C to 25deg C before entering the first extruder.

This is followed by a rise in temperature of 90deg C to 120deg C, and a final drop to about 100deg C.

A typical corn chip machine has multiple extruders with one or more temperature zones to achieve this profile.

Depending on the capacity, there are two types of extruders: single screw extruder and twin screw extruder.

The first is for forming corn chips. The second is for deep-frying. The extruder consists of a horizontal hydraulic piston that forces the masa to be at least 52% moisture through a 90-degree forming die.

In addition to standard extruders, there are interchangeable dies for different shapes.

During the frying process, water is exchanged with oil. Once the masa has reached the desired moisture content, it exits the fryer.

Cost

You can purchase a corn chip machine from a factory in China at a very low price.

The price of this machine will vary, depending on whether you are buying it for commercial use or if you are making it for personal use.

In China, the price for this machine varies, depending on the quantity and the importing country.

This article will explain how to find the lowest price when buying a chip machine from China.

The main raw material for a corn chip machine is corn. The corn is extruded, cut, baked or fried. The finished product is crispy and delicious.

The machine is easy to operate and uses a wide range of materials, including corn, rice, flour, mixed grains, etc.

To make it even better, it can use a variety of sizes and shapes. The machine can work with a variety of raw materials, including rice, wheat, and corn powder.

Contact Now

Blog: Advantages of Working With a China Corn Chip Machine Manufacturer