fbpx
Select Page

1. What is a Bone Crusher Machine

The bone crusher machine is a deep processing machine capable of crushing dried beef bones, fresh beef bones, large pig bones, sheep bones, chicken bones, pig skin, cowhide, sheep skin, fish bones and other animal and livestock bones.

The bone crusher can be matched with the bone crusher for deep processing of bones.

The material crushed by the bone crusher is secondarily ground by the bone crusher, and the fineness can reach 80-120 mesh. It is the ideal equipment for wet crushing at present.

Bone-Crusher-Machine (2)

2. Application of Bone Crusher Machine

This machine can be used to produce food, essence, spices, soup, hot pot, instant noodle seasoning, meat food, pet food, etc.

It saves time, effort, and consumption to boil broth. Efficient processing efficiency is 700 -900 kg/h.

3. Features of Bone Crusher Machine

The machine is made of 304 stainless steel, no pollution, in line with food hygiene standards, good wear resistance, long service life, simple operation, convenient cleaning and maintenance, and low noise.

4. Working Principle of Bone Crusher Machine

When the bone breaking machine is working, the skeleton in the hopper is continuously sheared and pushed to the pre-cutting knife plate by the rotating teeth.

The skeleton is shredded, and under the action of the screw squeezing force of the rotating tooth, the shredded bone particles and bone mud are continuously discharged to the hopper through the orifice plate.

89% Visitors Contacted Now and Got the Following Free Gifts

1. 2022 Full Catalogue

2. 2022 Full Price List

3. Technical Brochure

4. Operation Manual

5. A Surprising Discount

6. Some Free Accessories

5. Installation & instructions of Bone Crusher

a) Correctly connect the power supply. Before starting, pull the inertia wheel by hand to check whether there are abnormal sundries in the engine room.

b) Start idling and check whether the cutter turning is correct. If the direction is reversed, please change the connection sequence of the three-phase power line;

after confirming the cutter turning is correct, start idling for 3 minutes, fasten the feeding chamber, and make the protection switch fully in contact.

It can be put into production when it meets the crushing conditions.

c) It is forbidden to put iron and other hard objects into the crushing chamber.

d) If the abnormal sound is found, shut down immediately, check the cause, and restart after troubleshooting.

e) It is recommended to install the machine in an independent workplace.

6. Maintenance Instructions of Bone Crusher

a) The mechanical starter motor should be turned towards the ventilation position to ensure the working heat of the motor is dissipated and extend the life of the motor.

b) Check the bolts of the cutter regularly. After using the machine for a week, use the tool to tighten the bolts of the movable cutter and the fixation between the blade and the cutter holder.

c) Rolling bearing with seat: grease should be added to the bearing grease nipple every 20 days to ensure lubricity between the rolling bearings.

d) In order to ensure the sharpness of the cutting tool, check the moving knife regularly according to the usage conditions to ensure that the moving knife is sharp and blunt, causing unnecessary damage to other parts.

e) Before the second start, the remaining scraps in the machine room during the first break should be removed to reduce the starting resistance and reduce the motor load.

Regularly disassemble the wheel cover and belt wheel cover to remove the dust outlet under the flange.

The residual powder material discharged from the machine room enters the rotating bearing.

f) When changing the tool, keep the gap between the knife and the knife: 0.5-0.8mm as the standard.

g) Regularly check whether the belt is slack. If the belt is slack, loosen the motor fixing bolts and use a tool to move the motor outwards until the belt is tightened.

89% Visitors Contacted Now and Got the Following Free Gifts

1. 2022 Full Catalogue

2. 2022 Full Price List

3. Technical Brochure

4. Operation Manual

5. A Surprising Discount

6. Some Free Accessories

Contact Now

7. Bone Crusher Machine Cost & Price

The ex-factory price of the bone crusher is about several thousand dollars. This price does not include sea freight, insurance, customs clearance, and door-to-door delivery.

The price of the bone crusher is related to its model, output, performance, power, and the size of the feed inlet.

Click here to learn more about the bone crusher. If you want to buy a bone crusher, please contact us in time.

8. Industrial Bone Crusher Machine Manufacturer

Anyang Ainuok Machinery Equipment Co., Ltd is specialized in the research, development, production, and sales of Bone Crusher Machine for more than 10 years.

Bone Crusher Machine has been exported to England, Russia, Sweden, Poland, Romania, Malaysia, Indonesia, Vietnam, etc 120 countries and districts.

Warmly welcome clients at home and abroad to visit the Ainuok company.

 9. Bone Crusher Machine Australia/India/South Africa/Kenya

The bone crusher machine is a sunrise industry with a broad market, a wide range of applications, and considerable profits.

Warmly welcome customers from Australia/India/South Africa/Kenya all over the world to become our local agents of Ainuok Machinery.

Contact Now

Blog: Bone Crusher Machine

Contact Now

Blog: Bone Crusher Machine